Edelmann Elite coolers

OEM equivalent and universal coolers

Power steering coolers are designed by the OE manufacturer to perform a specific job that differs from vehicle to vehicle.

Edelmann Elite power steering coolers with their boxes

OEM equivalent

Built to OE spec

These vehicle specific tolerances are what makes it so important to replace the power steering cooler with as close to an OE match as possible. The Edelmann Elite coolers are designed and built to the genuine OE specifications to ensure performance with exact form, fit, and function to that of the OE unit being replaced.

Look inside

Universal

Universal Cooler

In applications where the OE has not provided a power steering cooler, Plews & Edelmann^® brings OE quality to a universal application. Equipped with sturdy, universal mounting brackets for expert and secure installation virtually anywhere needed, the Edelmann Elite^® universal cooler offers a more confident option to the aftermarket.

See the kit

OEM equivalent

Inside an Elite cooler

Pick a detail to see how it is built.

Turbulators

Proper Fluid Temperature

Turbulators churn the fluid and reduce the flow and pressure across the cooler. Without these turbulators, fluid is passing through the system before being properly cooled and pressures are increased over levels expected for the power steering pump. This device prevents further failures to the power steering system after a cooler replacement.

Single tube

Eliminate Leaks

Single tube construction is used to prevent the need for additional joints or welds. This prevents leaks and maintains a constant pressure along the entire length of the cooler, allowing the steering system to continue functioning as expected at all times.

Edelmann Elite 58007 cooler: one tube running the full length — **Edelmann Elite** One continuous tube, bent at the ends. No joints to leak.

Close-up of the Elite tube bending back on itself at the end — **Edelmann Elite** One continuous tube, bent at the ends. No joints to leak.

Competitor cooler: several straight tubes between two end reservoirs — **Competitor** Separate tubes joined at a reservoir on each end.

Close-up of the competitor tubes joining the end reservoir — **Competitor** Separate tubes joined at a reservoir on each end.

Fin designs

Original Fin Designs

With the OE spec designs, we can provide ideal cooling performance vs our competitors who reduce or reshape the fins to match their redesigned products. Cooling fins additionally serve dual purpose to not only cool the fluid but protect the tubing from flying debris.

Bracket designs

Direct Replacement

Exact match OE bracket designs are used to simplify the installation process. Other aftermarket coolers and some universals have varying designs that don’t allow for, or even prevent, installation in the manner designed by the OE. The Edelmann Elite^® cooler mounts are designed to install in the exact way in which the OE cooler was removed. Additionally, this ensures that the cooler is positioned correctly to receive the prescribed amount of air flow over the surface of the cooler and without blocking other vehicle components.

No Pop Rivets

Mounts are brazed and coated in place to prevent new failure modes being introduced.

Edelmann Elite cooler bracket, one piece with the cooler end — **Edelmann Elite** OE-style bracket, brazed and coated in place.

Competitor cooler bracket held on with two screws — **Competitor** Bracket screwed onto the end reservoir.

Tube Expansion

No Solders or Welds

Once the fins are placed and aligned on our single tube construction, the tube is forcefully expanded to hold the fins in place before being brazed and coated. This ensures a secure connection between the tube and the fins and makes the construction more durable.

Elite cooler end: the tube flared cleanly into the end plate — **Edelmann Elite** Tube expanded tight against the end plate. No welds.

Competitor cooler end: rough welds where the tubes meet the end plate — **Competitor** Tubes welded to the end plate.

Watch

Competitive Advantage

Universal cooler

Outperforms Others

The single tube design prevents leaks and ensures consistent flow while turbulators churn the fluid to maximize the cooling performance. Our cooler is E-coated after assembly to provide premium corrosion resistance and durability for long product life. Our cooler outperforms other similarly sized options in the aftermarket, ensuring optimal performance every time.

Kits Include:

Hoses
Mounting Hardware
Hose Clamps

Two universal cooler kits with their boxes

100 YR